|
When installing all masonry units, especially precast and natural
stone units for masonry veneer systems, it is imperative that the
mortar is designed to match the properties of the stone for optimal
shear bond strength and durability. SPEC MIX® Stone Veneer Polymer
Modified Mortar and Stone Veneer Joint Grout products are specifically
formulated and tested to ensure mortar to unit compatibility as
well as good workability.
 Our
Stone Veneer Mortar for "scratch & base coat" and
"joint grout" applications are computer batched and preblended
products that bond precast, lightweight masonry veneer units to
solid base surfaces such as in-place masonry, concrete or galvanized,
expanded metal lath. Available in natural gray or colored, SPEC
MIX® Stone Veneer Mortar is manufactured dry to eliminate the
inconsistencies associated with field-proportioned mortars. Only
the addition of water is needed to produce a mortar that provides
total quality control, consistency and optimal bond strength in
every batch.
SPEC MIX® Stone Veneer Mortar and Joint Grout is available
in 80 lb bags 42 or 30 bags per pallet for jobsite mixing, or in
reusable 3,000 lb bulk bags for use with the various patented silo
systems by SPEC MIX®
For more information call Package Pavement @ (800) 724-8193 or
visit www.specmix.com
SpecData®
information 
|
The
SPEC MIX® Stone Veneer Polymer Modified Mortar is a blend of dry
cementitious materials and masonry sand specifically designed to provide
superior bond for precast, lightweight masonry veneer units to base
surfaces. The final wall system will produce a non-load bearing, aesthetically
pleasing exterior veneer or interior finish on concrete or masonry
walls, stud walls or metal buildings. It is formulated to produce
a cohesive material with consistent workability and optimal bond strength.